New Pro-Mount Pro-Z MBC mounting bracket-

We are proud to release the new "Pro-Mount" mounting bracket designed specifically for the Pro-Z and Pro-Z TT manual boost controllers that looks as good as it functions! This bracket features the same high quality precision machining that the Pro-Z is known for along with a unique pivot mounting base which will pivot plus or minus ~110 degrees from flat. This allows the bracket to be easily tilted to any angle needed simply by loosening the pinch bolt with supplied Allen wrench, adjusting the angle and locking the pinch bolt back down. This unique bracket also features 8 position mounting for the Pro-Z. This allows the Pro-Z to be rotated 360 degrees in order to adapt to virtually any of your custom mounting needs. The bracket is supplied with hardware to mount the Pro-Z to the bracket, pivot bolt and Allen wrench. Since we cannot possibly supply bracket mounting hardware for every situation, those screws are not supplied. The mounting bracket is predrilled with 1/4" mounting holes which can very easily be drilled out should you need a larger diameter.

 

Personal note from Joe P.-
At $18, I understand that this bracket is not going to be for everyone- but keep in mind the time to make a bracket yourself, the time and cost of acquiring hardware and materials along with the fact that this bracket fits the Pro-Z like a glove, comes with everything needed to mount the MBC and adjust the bracket. It is perfect for those concerned with the "little details". I did my best to cut the price as low as possible, but between the actual time to machine this and paying by the minute for machine work, there wasn't much room for negotiation. This is honestly not a profit item for me by the time all is said and done- it is more of an offering for my customers to have a high quality, good looking means of mounting the Pro-Z. If you would be content with a zip tie to hold the controller in place, this bracket is probably not for you :).

The Pro-Mount Features a unique pivot design and provisions for recessed mounting of the Pro-Z and Pro-Z TT MBC. Notice the 8 mounting holes for the Pro-Z, this allows a full 360 degrees of rotation to position the Pro-Z according to your specific installation.

Side view Pro-Mount bracket showing it's unique pivoting design. The Pro-Mount pivots + or- ~110 degrees from flat to angle the controller as needed.

Pro-Mount shown with Pro-Z boost controller (MBC not included).

If you have any questions about the new Pro-Mount bracket, please contact us.